Influences of the inner diameter of the solid shielding tube on the characteristics of the radio-frequency cold atmospheric plasma jet

Active control of the local environment of the cold atmospheric plasma (CAP) jet is of great importance in actual applications since the CAP operates in an open atmosphere with the inevitable entrainment of the surrounding cold air. In this paper, the solid shielding effects of the cylindrical quartz tubes with different inner diameters on the characteristics of the CAP jets driven by a radio-frequency (RF) power supply are studied experimentally. The experimental results show that the total length of the shielded plasma jet can be increased significantly by an appropriate combination of the quartz tube inner diameter and that of the plasma generator nozzle exit with other parameters being unchanged. This phenomenon may be qualitatively attributed to the loss of diffusion of the charged particles in the radial direction under different inner diameters of the quartz tubes. Compared with the plasma free jet, the plasma shielding jet is produced with optimized parameters including longer plasma jet length, higher concentrations of chemically reactive species, higher rotational, vibrational, and electron excitation temperatures when the inner diameters of the solid shielding tube and the generator nozzle exit are the same. A maximum plasma jet length of 52.0 cm is obtained in contrast to that of 5.0 cm of the plasma free jet in this study. The experimental results indicate that the solid shielding effect provides a new method for the active control of the local environment of the RF-CAP jet operating in an open atmosphere.     

深井超深井钻井堵漏材料高温老化性能评价

深井超深井钻进裂缝性油气层极易发生频繁的钻井液漏失,造成严重储层损害和重大经济损失。储层段钻进过程中经常发生重复性漏失,意味着仅用酸溶率、粒度分布等常规堵漏材料评价指标已不能满足钻井液漏失控制工程需要。笔者以塔里木盆地克深气田钻井常用的核桃壳、毫米级碳酸钙为研究对象,开展了堵漏材料高温老化评价实验。实验评价结果表明,在180℃的柴油中老化24 h后,核桃壳的颜色由黄色变成黑色,质量损失率为25.16 % ,摩擦系数下降28.24 % ,抗压强度下降21.21 % ;毫米级碳酸钙的颜色由白色变成淡黄色,质量损失率为2.47 % ,摩擦系数下降1.33 % ,抗压强度基本不变;由高温老化后的核桃壳和毫米级碳酸钙所形成的封堵层,其承压能力下降了48.84 % 。分析指出,堵漏材料高温老化失效是深井超深井裂缝封堵层结构破坏并在储层段发生重复性漏失的一个重要因素。     

爆炸防控技术在爆破工程警务规划和技术评估中应用

通过介绍爆炸防控技术概念的内涵和外延,说明了爆破工程警务规划设计和技术评估的目的,就是有效防止或遏制涉爆事故,维护社会公共安全。在对一项复杂环境下的基础开挖爆破工程实施警务规划设计和技术评估时,警务技术民警对照爆破作业设计施工单位技术方案中的参数,现场核实需要保护的建筑和重要设施,准确测量保护目标与爆区的实际距离,分析是否存在影响爆破工程实施的不稳定因素,确认上述参数符合安全要求后做出准予爆破许可的建议。爆破工程警务规划设计和技术评估的要点就是要通过现场核查,核实爆破有害效应是否可控,能否确保爆破施工时周边保护目标的安全。     

Semirigid inclusions in elastic bodies: Mechanical interplay and optimal control

The paper concerns an analysis of an equilibrium problem for 2D elastic body with two semirigid inclusions. It is assumed that inclusions have a joint point, and we investigate a junction problem for these inclusions. The existence of solutions is proved, and different equivalent formulations of the problem are proposed. We investigate a convergence to infinity of a rigidity parameter of the semirigid inclusion. It is proved that in the limit, we obtain an equilibrium problem for the elastic body with a rigid inclusion and a semirigid one. A parameter identification problem is investigated. In particular, the existence of a solution to a suitable optimal control problem is proved.     

Unconditional stability and error estimates of the modified characteristics FEMs for the time-dependent incompressible MHD equations

This paper focuses on the unconditional stability and convergence of characteristics type methods for the time-dependent incompressible MHD equations. For this purpose, we introduce a new characteristics time-discrete system. The optimal error estimates in $L^2$ and $H^1$ norms for the typical modified characteristics finite element method unconditionally can be deduced, while the whole previous works require certain time-step restrictions. Some numerical experiments document performance of the characteristics type methods for the time-dependent incompressible MHD equations.     

Numerical analysis of history-dependent hemivariational inequalities and applications to viscoelastic contact problems with normal penetration

In this paper numerical approximation of history-dependent hemivariational inequalities with constraint is considered, and corresponding Céa’s type inequality is derived for error estimate. For a viscoelastic contact problem with normal penetration, an optimal order error estimate is obtained for the linear element method. A numerical experiment for the contact problem is reported which provides numerical evidence of the convergence order predicted by the theoretical analysis.     

Event-triggered distributed receding horizon control for tracking and formation of homogeneous multi-agent systems

This paper proposes an event-triggered distributed receding horizon control (DRHC) approach for the formation and tracking problems of homogeneous multi-agent systems. For each agent, an event-triggering condition, based on assumed predictive information of the neighbours, is derived from stability analysis. Considering the uncertain deviation between the assumed and true predictive information, we design a time-varying compatibility constraint for the individual optimization problem. In the event-triggered DRHC algorithm, each agent solves the optimization problem and communicates with its neighbours only when the event-triggering condition is satisfied, so the communication and computation burden are reduced. Moreover, guarantees for the recursive feasibility and asymptotic stability of the overall system are proved. A simulation example is provided to illustrate effectiveness of the proposed approach.     

Compound fault-tolerant attitude control for hypersonic vehicle with reaction control systems in reentry phase

In this paper, a novel compound fault-tolerant attitude control (FTC) scheme is proposed for reentry hypersonic vehicles with aerodynamic surfaces and reaction control systems (RCS) in the presence of parameter uncertainties, external disturbances and aerodynamic surfaces faults. Aerodynamic surfaces work as the primary actuators and RCS serve as auxiliary actuators. When aerodynamic surfaces cannot provide the required attitude control torque due to low dynamic pressure or faults, RCS are activated to assist aerodynamic surfaces to generate the residual torque. A nonlinear disturbance observer-based sliding mode controller is designed to calculate the required attitude control torque which can handle the parametric uncertainties and external disturbances together. The quadratic programming method is applied to obtain the optimal aerodynamic surfaces deflections from the required control torque. An innovative fuzzy rule-based decision-making system is design to solve the RCS control allocation problem, which is conceptually easy to understand and computationally efficiently compared with existing approaches. Based on quantized control theory, the closed-loop control system stability is rigorously analyzed. Simulation results are given to demonstrate the effectiveness and efficiency of developed FTC scheme.     

A review on MRAS-type speed estimators for reliable and efficient induction motor drives

Induction machines have recently been very popular in variable-speed drives, because of their robust construction and relatively low manufacturing costs (brushless), maintenance-free and well-matured control methods. However, for high-precision control and efficiency optimization one needs the information on the rotor speed which can be measured using different speed sensors. All sensors require a mounting space and cabling, they also generate extra costs and reduce system reliability. Therefore, many of the recent research efforts have been dedicated to sensorless or encoderless electrical drives offering such considerable advantages as: lower cost, reduced size and hardware complexity of the drive system, elimination of sensor cables, lower maintenance requirements, possible operation in aggressive environment, higher noise immunity, reliable and user friendly operation. In this article all well-known sensorless techniques are shortly addressed, but the main focus is on the solutions based on the Model Reference Adaptive System (MRAS) concept. The mathematical models and schemes of all types of MRAS-type speed estimators known from the literature are gathered in this article. The comparative analysis of these speed estimators is done from the following points of view: the speed adaptation mechanism derivation based on the Lyapunov theory, stability problems near zero speed and in the regenerating operation mode, and the sensitivity of MRAS estimators to induction machine parameter changes.